A comparison of visual ability and its importance awareness between novice and experienced drivers

The visual ability factors of peripheral perception, visual reaction and visual pursuit ability are important for safe driving. Thus, this study explored the influence of driving experience on these visual ability factors. Sixty-five drivers, including novice and experienced drivers, participated in this study. The visual ability levels of the three factors were measured by the Vienna Test System. In addition, driver's awareness of the three factors' importance for safe driving was measured by questionnaire items. Results showed that out of the three factors, drivers' peripheral perception ability was correlated significantly with their driving experience. Experienced drivers had higher peripheral perception ability than that of novice drivers. In addition, compared with novice drivers, experienced drivers believed that peripheral perception was more important whereas visual reaction was less important. It is suggested that higher attention should be paid to peripheral perception in driving training and novice drivers should increase their importance awareness for this factor.     

Preparation and electrochemical characterization of Ti-based amorphous metallic glass with high strength

Ti-based amorphous metallic glasses have excellent mechanical, physical, and chemical properties, which is an important development direction and research hotspot of metal composite reinforcement. As a stable, simple, efficient, and large-scale preparation technology of metallic powders, the gas atomization process provides an effective way of preparing amorphous metallic glasses. In this study, the controllable fabrication of a Ti-based amorphous powder, with high efficiency, has been realized by using gas atomization. The scanning electron microscope, energy-dispersive spectrometer, and X-ray diffraction are used to analyze surface morphology, element distribution, and phase structure, respectively. A microhardness tester is used to measure the mechanical property. An electrochemical workstation is used to characterize corrosion behavior. The results show that as-prepared microparticles are more uniform and exhibit good amorphous characteristics. The mechanical test shows that the hardness of amorphous powder is significantly increased as compared with that before preparation, which has the prospect of being an important part of engineering reinforced materials. Further electrochemical measurement shows that the corrosion resistance of the as-prepared sample is also significantly improved. This study has laid a solid foundation for expanding applications of Ti-based metallic glasses, especially in heavy-duty and corrosive domains.     

A theoretically-based novel protocol for the analytic treatment of the glass failure stresses associated with coaxial double ring test method

With the aim of validating a new standardized Coaxial Double Ring testing procedure, without overpressure and with fixed geometry, an ad hoc theoretical approach has been proposed here to rearrange the laboratory outcomes accounting for the effects of the geometric non-linearities associated with such a testing configuration. By borrowing this idea, once the experimental values of the failure load have been determined, it has been possible to obtain an expression in closed form (fully defined by only two coefficients) of the maximum tensile stress (σ_max) in the core of the specimen. Following this, in order to make the laboratory outcomes comparable and homogeneous, the σ_max-values have been then re-scaled to a common reference condition (equibiaxial stress on a reference area, σ_eqbx), by means of the use of a correction coefficient (K) able to determine, under a condition of equal probability of failure, the effective area (A_eff) of the tested specimens. After being corrected to account for the effects of the stress corrosion cracking (static fatigue effect), all re-scaled data have been finally interpreted using a Weibull-type statistical distribution to determine the main fractile values of the glass strength. Doing so, despite some unavoidable approximations, this procedure furnished a highly effective means of determining the bending strength of float glass. Unlike the pure numerical approach proposed in codes and literature, which requires to correct the experimental data via FEM simulation, the rationale behind the proposed approach is in fact to elaborate the experimental data through an analytic treatment of the problem, which would greatly facilitate the interpretation of the data as well as the standardization of the testing procedure.     

Excision of Oxidatively Generated Guanine Lesions by Competitive DNA Repair Pathways

The base and nucleotide excision repair pathways (BER and NER, respectively) are two major mechanisms that remove DNA lesions formed by the reactions of genotoxic intermediates with cellular DNA. It is generally believed that small non-bulky oxidatively generated DNA base modifications are removed by BER pathways, whereas DNA helix-distorting bulky lesions derived from the attack of chemical carcinogens or UV irradiation are repaired by the NER machinery. However, existing and growing experimental evidence indicates that oxidatively generated DNA lesions can be repaired by competitive BER and NER pathways in human cell extracts and intact human cells. Here, we focus on the interplay and competition of BER and NER pathways in excising oxidatively generated guanine lesions site-specifically positioned in plasmid DNA templates constructed by a gapped-vector technology. These experiments demonstrate a significant enhancement of the NER yields in covalently closed circular DNA plasmids (relative to the same, but linearized form of the same plasmid) harboring certain oxidatively generated guanine lesions. The interplay between the BER and NER pathways that remove oxidatively generated guanine lesions are reviewed and discussed in terms of competitive binding of the BER proteins and the DNA damage-sensing NER factor XPC-RAD23B to these lesions.     

虚实结合的可穿戴产品适合性检验研究

目的 为了更科学地研究和检验可穿戴产品的适合性,提出一种适合性检验方法,能够精确保留现实环境中的产品佩戴关系,并能将现实与虚拟的适合性检验研究相结合,得到合理的适合性检验结果.方法 以虚拟现实眼镜的适合性检验为例,通过高精度的三维测量技术将现实环境中的人、产品以及人—产品佩戴关系转化为三维虚拟信息,并以人—产品佩戴三维模型为参考基准对齐人和产品的虚拟模型,得到保留现实佩戴关系的人—产品佩戴模型组,再应用偏差分析法得出人—机佩戴区域的可视化适合性结果和统计数据,结合主观评价方法进一步分析产品的适合性.结论 虚实结合的产品适合性检验方法可在虚拟环境中高精度地保留现实环境中的人—产品佩戴关系,并能得到可视化的适合性检验结果,为检验和指导产品的适合性提供依据.     

Simulation studies on a rotating ring disk electrode: Effects of ionic migration with kinetic complication-disk results

In continuation to my previous work (Guha S. AIChE J. 2013;59(4):1390-1399), in this work, effects of ionic migration are evaluated for disk region of a rotating ring disk electrode system by numerically solving complex differential equations, developed for mass transfer along with kinetic complication in presence of ionic migration under limiting current condition. The system for simulation is 0.01 M Fe₂(SO₄)₃ solution with H₂SO₄ as supporting electrolyte. Simulation cases are presence and absence of ionic migration with kinetic complication (oxidation of Fe²⁺ to Fe³⁺ under O₂ pressure). Results show that concentration boundary layer thickness of reactant Fe³⁺ reduces appreciably and steady-state disk current reduces substantially in presence of migration. Simulated steady-state disk current in absence of migration case agrees well with published data. Results indicate higher Fe²⁺ concentration in presence of migration and thereby higher rate of oxidation of Fe²⁺ to Fe³⁺ at all rate constant values.     

A dotted nanowire arrayed by 5 nm sized palladium and nickel composite nanopaticles showing significant electrocatalytic activity towards ethanol oxidation reaction (EOR)

To the best of our knowledge, this is the first time to report the preparation of a dotted nanowire arrayed by 5 nm sized palladium and nickel composite nanoparticles (denoted as Pd_xNi_y NPs) via a hydrothermal method using NU and PdO·H₂O as the starting materials. The samples prepared at the mass ratio of NU to PdO·H₂O 1:1, 1:2 and 2:1 were, respectively, nominated as catalyst c₁, c₂ and c₃. The chemical compositions of all synthesized catalysts were mainly studied by using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), revealing that metallic Ni was one main component of all prepared catalysts. Surprisingly, the main diffraction peaks appearing in the XRD patterns of all prepared catalysts were assigned to the metallic Ni rather than the metallic Pd. Very interestingly, as indicated by the TEM images, a large number of dotted nanowires arrayed by numerous equidistant 5 nm sized nanoparticles were distinctly exhibited in catalyst c₁. More importantly, when being used as electrocatalysts for EOR, all prepared catalysts exhibited an evident electrocatalytic activity towards EOR. In the cyclic voltammetry (CV) test, the peak current density of the forward peak of EOR on catalyst c₁ measured at 50 mV s^?1 was as high as 56.1 mA cm^?2, being almost 9 times higher than that of EOR on catalyst c₃ (6.3 mA cm^?2). Particularly, the polarized current density of EOR on catalyst c₁ at 3600 s, as indicated by the chronoamperometry (CA) experiment, was still maintained to be around 1.47 mA cm^?2, a value higher than the latest reported data of 1.3 mA cm^?2 (measured on the pure Pd/C electrode). Presenting a novel method to prepare dotted nanowires arranged by 5 nm sized nanoparticles and showing the significant eletrocatalytic activities of the newly prepared dotted nanowires towards EOR were the major contributions of this preliminary work.     

Recent advances in two-dimensional Pt based electrocatalysts for methanol oxidation reaction

Direct methanol fuel cells (DMFCs) had been attracted considerable attention for its advantages of high energy density, simplified systems and readily transportation and storage of methanol. However, the notoriously sluggish kinetics of methanol oxidation reaction (MOR) of the anode reaction, had greatly affected the commercialization of DMFCs. On one hand, Pt based catalyst are still the most effective MOR catalysts, while the high cost caused by the high loadings of electrocatalyst to compensate the low MOR activity impedes the wide accessible of DMFCs. In addition, the occurrence of catalyst poisoning owing to the strong interaction between Pt and carbon monoxide (CO) generated during the MOR processing, further leading to the fast decay in the performance and stability of MOR electrocatalysts. Two-dimensional (2D) Pt based nanostructures is regarded to be one promising and effective class of MOR electrocatalysts, and attracted much attention due to the high electron mobility, highly exposed active sites, and extraordinary thermal conduction. In this review, the mechanism of MOR was firstly introduced, and then the synthesis conditions, structure characteristics and methanol oxidation performances both in acidic and alkaline dielectric of 2D Pt based nanocatalysts were introduced. Subsequently, we briefly analyzed the structural characteristics of 2D Pt based nanocatalysts and their advantages, including the low platinum loadings, high specific surface area and majority of atomic active sites exposed. Finally, the opportunities and challenges for designing of advanced 2D Pt based nanocatalysts was proposed and discussed.